1768-L45/AB Memory Module

1768-L45/AB Memory Module

Contact: Miya

Job Title: Sales Manager

Skype: live:miyazheng520

Email: sales@amikon.cn

Tel: 86-18020776792(Whats App )

QQ :2851195450

Brand Name                 AB

Product reference      1768-L45

The 1768-L45 Compact Logix controller by Allen-Bradley offers solutions for control applications with motion, I/O, and network demands. It has 4 available slots for module support and can support four 1768 backplane modules. It supports a 1768 backplane current of 2.0 Amps at 24 Volts, and a 1769 backplane output current of 2.0 Amps at 5.7 Volts. The 1768-L45 also provides a 1768 backplane output current of 5.6 Amps at 5 Volts, and in total it provides 1768 and 1769 backplane current of 7.6 Amps at 5.2 Volts. It dissipates 9.5W along it circuit and a power consumption of 50.4W.

The 1768-L45 can support a maximum of thirty 1769 I/O modules which can reside in 3 local I/O module banks. It has an isolation voltage of 30 Volts with the isolation type tested at 500 Volts AC for 60 seconds. The 1768-L45 is certified at the T4 (135 degrees Celsius) temperature code. For mounting, M4 or #8 screws must be used. It has dimensions of 131.6 x 67.4 x 121.8 millimeters (5.18 x 2.65 x 4.80 inches) and weighs approximately 0.34 kilograms (11.9 ounces). The 1768-L45 has an operating temperature range between 0 and 60 degrees Celsius (32 and 140 degrees Fahrenheit) at a 5 to 95% non-condensing relative humidity. It has an operational shock rate of 30G and one of up to 50G in non-operational mode, with a maximum vibration of 5G at 10 to 500 Hertz. It has a CISPR 11:  Group 1, Class A, emission standard for an industrial environment. It is cUL-us tested and certified to meet standard requirements in the US and Canada.

Attempting to use controllers with incompatible software and firmware revisions can result in the following: • An inability to connect to the controller • Unsuccessful firmware upgrades in ControlFLASH™ or AutoFlash utilities

When designing a CompactLogix system, determine the network configuration and the placement of components in each location. You need to do the following: • Select I/O devices for your DIN-rail or panel-mounted system. • Establish motion control and drives requirements. • Select communication modules. • Select controllers. • Select power supplies. • Mount the system. • Select software.

You need these parts when installing your controller: • 1768-L43 or 1768-L45CompactLogix controller • 1768-PA3 or 1768-PB3 power supply • 1769-ECR end cap • Mounting screws (M4 or #8 panhead) or one of these EN 50 022 DIN rails: – 35 x 7.5 mm (1.38 x 0.30 in.) – 35 x 15 mm (1.38 x 0.59 in.) • 1756-CP3 serial cable (or make your own)

CompactLogix System Distance Ratings Because the 1768 CompactLogix power supply works with the controller to power a 1768 system, the distance rating in a 1768 CompactLogix system differs from that in a 1769 CompactLogix system. In the 1768 system, the distance rating is the distance between 1769 I/O modules and the controller. In the 1769 system, the distance rating is the distance between 1769 I/O modules and the power supply.

OTHER RECOMMENDATION

Our Advantages:

If you have any question pls do not hesitate to contact us.We can supply all kind of the automation parts,if you want to purchase parts pls send the parts model to my mail, I will prompt reply you as I receive the mail.Hope anyone inquire from us.    Waiting for your inquiry.