Contact: Jessica
Skype: jessica01235483
Email: sales3@amikon.cn
Mobile: 86-18030235311(WhatsApp)
All output I/O modules implement the Output Set to Predetermined (OSP) function. The outputs of the I/O module are set to a predetermined value, if the OSPwatchdog timer expires or if the SetOSPState command is received. The watchdog timer is set by the controller (OSP timer) and is used for ModuleBus supervision.
The watchdog timer is re-triggered every time the correct node address is decoded (or broadcast). If the watchdog timer expires or if the SetOSPState command is received, the module enters the OSP state and the active outputs (if any) are set to their OSP values. The OSP value can be either configured as a predefined value or set to use the last good value sent.
ABB CI541V1
CI541V1 | ABB | Interface Module
The output values are kept as long as the module stays in the OSP state. To change the outputs, the module first has to leave this state. When re-entering Operational State, the outputs are still kept with their OSP value until new valid values are written.
Email: sales3@amikon.cn
| ABB | ||||
| DSTA 180 | AI930N | YXO124 | ||
| DSQC239 | AI931S | SNAT0100-6B | ||
| DSQC236G | AI910N | YXO116 | ||
| DSDO131 | AI950N | 6638910B1 638910B1PS0084 | ||
| 1SAR3300020R0000 | AO920N | SMU-03 3HNA013638-001 | ||
| 07KT93 | TS102 | DSQC604 3HAC12928-1 | ||
| DSDO120 | AO920S | 086363-002 OSPS2 | ||
| DSBC 110 | AI910S | DSQC 332 | ||
| DAI04 | TY801K01 | AI835A 3BSE051306R1 | ||
| COMMANDER 100 | SD821 | AC800F 3BDH000002R1/PM802F 3BDH000002R1 | ||
| SAFT187CON | TU811v1 | AC800F 3BDH000011R1/SA801F 3BDH000011R1 | ||
| CS300E PAC 031-1053-00 | TU810v1 | FI830F 3BDH000032R1 | ||
| SC300E PAC 031-1053-04 | TU847 | EI802F 3BDH000016R1 | ||
| SB511 | SD833 | 3HAC024322-001/01 | ||
| DSQC652 | INTCT12 | DO820 3BSE008514R1 | ||
sales3@amikon.cn (☜☜ click)
