Email: sales3@amikon.cn
Contact: Jessica | Skype: jessica01235483 | Mobile: 86-18030235311(WhatsApp)
The Bus Station Number is the address under which the safety PESs are addressed when serial communication via RS-485 is used. This address should be the same like the numbers ending the resource name in ELOP II from which the IP-Address is generated (see chapter 2.2.2 for details).
There is one DIP-switch on each H41q/H51q CPU (e.g. F 8650X and F 8652X for SIL3 operation) setting the BSN and the serial transmission rate for the two integrated serial RS-485 interfaces. The BSN is set with switches 1-5 on DIP-switch S1 in a range from 1 to 99 using standard binary coding (for details about DIP switch settings on the CPU see [1] or the separately available CPU datasheets).
HIMA F7132
F7132 | HIMA | Power Module
The switches S1/1-7 are used for internal H41q/H51q communication and should be sufficient for most applications when set as shown above.
Switch S1/8 should be set to “Passive Mode enabled” to ensure also fast communication to the HIMA OPC DA Server by disabling time consuming Token Passing
Email: sales3@amikon.cn
| HIMA | ||
| F7553 | F3 DIO 20/8 F3DIO 982200404 | |
| F3403 | F60 DIO 24/16 01 982200100 | |
| F3108 | F2 DO 16 02 F2DO 982200422 | |
| F1201 | F31 SPS D0171 | |
| F3407 | F2 DO 16 01 F2DO1601 D0172 | |
| F3417 | F35 steuerung | |
| F4111 | F1 DI 16 01 F1DI1601 | |
| F3406 | F35 | |
| F2102 | XPSMF2DO801 XPSMF2 | |
| F1202 | F2 DO 16 01 F2DO1601 | |
| F3117 | F31 02 F3102 | |
| F3105 | F3 DIO 8/8 01 F3DIO8/801 | |
| F3113A | F6205 | |
| F3406A | F8621A | |
| F1107 | F8628X | |
☞☞☞☞☞☞☞☞☞ sales3@amikon.cn (☜☜ click)
